Expert Answers about Cup Holder

• Are The JR Products Adjustable Cup Holders UV Resistant?
• The JR Products Adjustable Cup Holder # 37245623 is made of an ABS plastic. ABS is not necessarily known for its UV resistance. That said, we have found that these cup holders are perfectly acceptable for outdoor use. The plastic is sturdy, it will hold up to impact and repeated opening and closing. It even works nicely with the heavier steel cups that seem to be so popular these days. The plastic can become sun-faded over time though, especially if you have it installed in a location...
  view full answer...


• 2024 Toyota Grand Highlander Trailer Wiring Harness for No Factory Tow Package
• Since your 2024 Toyota Grand Highlander doesn't come with the factory tow package you need the Curt T-Connector Vehicle Wiring Harness # C79VV. The module plugs into that 10-Pin connector you found under the cup holder and then the 4-Way harness connects to the plug found under the driver-side rear bumper section. There will be a dust cover you need to remove prior to plugging the 4-Way harness into this connector.
  view full answer...


• Wiring Needed To Install A Redarc Trailer Brake Controller On a 2018 Ford Transit 250
• Since you have that harness with your 2018 Ford Transit 250 you may have the wiring for a tow package and just not have the connector on the back. You can look behind your rear bumper for a round connector like the # 20147. If you have this you can simply plug in the Connector # HM40975 to have both a 7-way and 4-way on the back of your Transit. The connector for the brake controller is going to be located under the cup holders on your center console. This would allow you to splice in...
  view full answer...